Main Specifications:

Operating principle:

I-E (interface-echo) mode with single-crystal delayed probe
E-E (echo-echo) mode with single-crystal delayed probe

Measuring range:

1.5mm to 18mm; 0.059in-0.709in in I-E mode
0.25mm to 10mm; 0.012in-0.394in in E-E mode
Depending on probe, material and surface condition

Digital resolution:

H＜0.4in : 0.0001in/ 0.001in/ 0.01in or 0.001mm/0.01mm/0.1mm
H≥0.4in : 0.001in/ 0.01in or 0.01mm/0.1mm

Units:

Selectable: inch or mm

Display:

128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm)
EL backlight and switchable contract ratio
Digit height: 0.54in or 13.75mm

Measurement update rate:

4 Hz in standard measurement mode
25 Hz in MIN capture mode

Material velocity range:

1000 to 9999 m/s; 0.039 to 0.394 inch/µs

Power:

Two 1.5V AA alkaline batteries
Warning with low battery voltage

Operating time:

Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode

Auto shut-off:

After 5 minutes of non-use

Operating temperature:

-10℃ to +50℃; +14℉ to +122℉
Specification to -20℃/-4℉ on request

Size:

5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D)

Weight:

200g; 7oz (including batteries)

Data logger capacity:

Up to 500 readings can be divided into a maximum of 5 files (user-selectable)

Application software:

UMVIEW

Interfaces:

Serial RS 232C port in combination with a communicative cable;
Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.

Standard package:

Thickness gauge
Standard probe (single-crystal delayed probe)
Carrying case
Two 1.5V AA alkaline batteries
Couplant
Operating manual
Certification of quality
Packaging list

Optional accessories:

Attachable rubber case
Numerous special probes on request
Couplants and high-temperature couplant
4-step/6-step block for calibration
Data transmission cable
Application software